Resetter Epson Stylus Photo R230 R220 and R270

Download Service Manual Epson R230 and R220


Before run adjustment program or software resetter Epson Stylus Photo R220 and R230, set date setting in your computer to 12 January 2006. Appearance of adjustment program Epson stylus photo R220 and R230 like adjustment program for Epson C45. Your Epson Stylus Photo R220 and R230 must be installed correctly in your computer before using the software otherwise so this software resetter will not be used.
Here how to use the software

* Download and extract downloaded software and run it.
* Click accept button.
* Set model name, port selection and destination setting and equal
to your printer.
* Click Maintenance Tab.
* Check mark waste ink pad counter.
* And the clear the protection counter (reset counter to zero)
* Then click Ok, Ok
* done

=> adjusment program Epson R220 - R230
=> adjusment program Epson R270
Download manual service
and any way if epson r230 blinking you can use SSC
klik at => SSC 4.3 and there are tutorial and how to use it.

How to use the SSC Service Utility

Please to be Patient and if any one want something else please give me comment down here Ok
thanks guys 4 all comment

Read More..

Printer Driver Canon PIXMA iP7220

Compatibility and system requirements :
- Windows 8
- Windows 7
- WIndows Vista
- Windows XP

- all drivers Support 32bit and 64bit
Download link Canon PIXMA iP7220 Printer drivers
link

Mac OS
Mac OS X v10.8
Mac OS X v10.7
Mac OS X v10.6
Mac OS X v10.5
Link download

Read More..

How to Reset Your Canon Pixma IP1880

Waste Ink Counter Reset Manual for Service mode
1. Turn On iP1880
2. Push and Hold Resume button about 2 minutes
3. Release Resume button
4. Printer back to normal again

Read More..

EPSON Reset Stylus Color 400 600 EPSON Stylus Color 400 600

EPSON Stylus Color 400, 600 EPSON Stylus Color 400, 600

Pressing and holding LOAD/EJECT and CLEANING buttons, press POWER button and hold it until You will see blinking INK OUT and PAPER OUT leds. Pressing and holding LOAD / EJECT and CLEANING buttons, press POWER button and hold it until You will seeblinking INK OUT and PAPER OUT leds.
Release all buttons. Release all buttons.
In 2-3 seconds time press and release LOAD/EJECT button. In 2-3 seconds time press and release LOAD / EJECT button.

Read More..

Resetter Epson SP 1390

Download resetter epson SP 1390

Easy to use and small file

How to use resetter Epson Sp 1390

1. Change the date of your PC to the October 4, 2007
2. Run the reset program by double-clicking "AdjProg.exe"
3. Click "Particular adjustment mode"
4. Select "Waste ink pad counter"
5. Click "Check and Initialization"
6. Click "Finish"
7. Turn off the printer
8 Turn on the printer
9. Good luck

Read More..

EPSON C67 Reset Software

actually i,m also using C67, C68 and C87 epson printer with CISS or continuous ink supply system but unfortunately this practice waste me a lot of ink just by doing printhead clean-up.
this technology is not really worth buying for.

this because if can can just figure out how this printer feed ink by original cartridges you can see easily the problem brought by this CISS.

Basically the main problem is the pressure difference between the tank and the ink delivery cartridges with the built-in auto reset chips, this, even just simple pressure calculations you can actually derive a negative pressure pulling the ink towards the tank,
every after printing (if you can notice) you have to do the routine head clean-up and therefore wasting a lot of ink. base from experience it would be much better if you just refill the original cartridge and transfer the auto reset chips to the genuine cartridges.Download

so by doing this you can save the life of your printerhead, ink pad etc. also the original cartridge contain a sponge which also aid in filtering the refilled ink unlike the ciss cartridge that has none.

Epson Adjustement program

Read More..

Canon S450 Printer

1: Power off printer
2: Hold Resume button then press and hold POWER, the beeper will sound once.
3: Hold POWER and release RESUME
4: Press RESUME twice
5. Release Power button
6: When the indicator lights steady, press RESUME three times. The indicator should be orange.
7: Press Power to set data

Read More..